Multi Battery LED Rechargeable Work Light 3000 MA (LED site light 3150lm, IP65, work light compatible with 18V batteries from 10 different power tool manufacturers, without battery, Engineered in Germany)
Description
Thanks to the brennenstuhl® Multi Battery 18V System, the extremely robust and bright Multi Battery LED work light with 30W power is compatible with different 18V batteries (various Ah classes) from the ten power tool manufacturers Bosch Professional, Dewalt, Einhell, Festool, Flex, Hikoki, Makita, Metabo CAS, Milwaukee and Würth. So no matter which battery system is already in use, the interface technology allows maximum flexibility and it is possible to fall back on the battery system of one's choice. The matching adapter can be inserted into the interface with just a flick of the wrist. Brennenstuhl is part of AMPShare - Powered by Bosch Professional. The AMPShare battery alliance enables the use of Brennenstuhl work lights with the 18V batteries from Bosch Professional. LED construction light with 3150lm offers optimum light distribution through large-area illumination with glare-free and impact-resistant working light. The impact-resistant site light can be used flexibly and as required, whether standing upright, lying flat for wide-area illumination or mounted on a tripod. The impact-resistant construction spotlight with enormous luminosity thanks to built-in SMD LEDs also has a battery status display for the remaining energy of the batteries used (the batteries must be charged externally) and a protection system for Power-Tool batteries. This protects the batteries from deep discharge and overheating (caused by high load currents). The Multi Battery LED spotlight also has the following impressive features:
- With on/off switch
- LED spotlight with anti-tilt protection, protects working light and housing of the spotlight
- Ergonomic handle
- Tripod mounting possible
- Light duration depending on the battery used:
approx. 51 min/1Ah at 75% light output,
approx. 76 min/1Ah at 50% light output,
approx. 152 min/1Ah at 25% light output
- With 4 switching levels (100% - 75% - 50% - 25%), direct full power when switched on
- Power consumption: 27W
- Luminous flux: 3150lm
- Protection class: IP65
- When using 18V batteries of higher Ah classes without battery protection cover IP20
- Impact resistance: IK08
- Protection class: III
- Category 2 (K2) equipment: for use in harsh environments with high mechanical, physical and chemical loads
The brennenstuhl® Multi Battery 18V System makes it possible to use a work light with the already preferred battery system. The LED battery work light 3000 MA is suitable for use with 11 outstanding Powertool 18V battery systems with just one handle. The interface between the work light and the battery are 10 adapters.
- approx. 2.5h/4Ah at 100% light intensity,
- approx. 3.4h/4Ah at 75% light intensity,
- approx. 5h/4Ah at 50% light intensity,
- approx. 10h/4Ah at 25% light intensity
The Multi Battery LED battery work lights are compatible with various 18V batteries (different Ah classes) from the Powertool manufacturers. To use some batteries of higher Ah classes, the battery protection cover of the work light must be removed. Without the protective cover, the work light complies with protection class IP20 (protected against contact and foreign bodies). With the protective cover, the LED rechargeable work light 3000 MA can be used outdoors without any problems thanks to the IP65 protection class.
Technical data
- Type of lamp: Floodlight
- Housing material: Plastic rubberised
- Luminous flux: 3.150 lm
- Protection class: III
- Type of input voltage: Direct voltage (DC)
- With on/ off switch: Yes
- Degree of protection (IP): IP65
- Impact strength: IK08
- Height: 22,70 cm
- Length: 16,90 cm
- Weight: 2,28 kg
- Width: 28,50 cm
- Voltage: 18 V
- Colour temperature: 6500 K
- Nominal input voltage: 18 V
Scope of supply
Multi Battery LED battery construction spotlight 3000 MA, 6 interface adapters, bag for adapters
Downloads
Accessories
All products are subject to technical changes